Heating manifold, DN 32 (11/4”) brass, 16 heating circuit sets with flow meter

The underfloor heating manifold made of brass 1 1/4 inch x 16 heating circuits is specially designed for large volume flows. It has flow bars and return bars made of chrome-plated brass, which allow 16 heating circuits to be connected separately. Every heating circuit can be individually adjusted. This is made possible by flow meters with a measuring scale integrated in the flow bar, which enables the respective flow rate to be visually recorded and adjusted as required. The return bar on the underfloor heating manifold is equipped with thermostatic shut-off valves that can be opened or closed depending on the room temperature. The valves can be adjusted manually and they can also be optionally equipped for electrothermal control. This way, the heating manifold can supply underfloor heating and air-conditioning systems optimally at all times. Both the flow bar and the return bar are equipped with ball valves, which allow the connections to be quickly interrupted if necessary. In addition, the supply and return lines each have a vent plug and a drain cock. The main connections are connected via screw connections with 1 1/4 inch thread, the heating circuits are connected via 3/4 inch Eurocone screw connections. The brass underfloor heating manifold is supplied completely pre-assembled including wall bracket.