GYS electrode welding device, PROGYS 180 A + welding helmet LCD Master 9/13G Iron

• Suitable for all common rutile and basic wrapped rod electrodes to be welded on direct current (steel, stainless steel, cast-iron etc.)
• Excellent weld penetration and arc stability
• ARC FORCE: Stabilises the arc by correcting the voltage if the electrode’s distance to the weld metal changes
• HOT START: Improves ignition properties by briefly increasing welding current. The arc ignites instantly in a reliable manner
• ANTI STICKING: Helps to reduce the tendency of the electrode to stick in the weld pool.
• TIG welding is possible:
- in combination with extension set (order no. 80 082 47)
- With TIG contact ignition

• Welding method: electrodes
• Cuts: no
• Current: 10-180 A
• Welding filler materials: electrodes ø 1.6 - 4.0 mm
• Wire coil: no
• Wire guide rolls: no
• Voltage (V): 230
• Control panel: potentiometer
• Duty cycle at 40°C: 60% at 120 A
• Suitable for generators (+/- 15%) max: 7 kW/10 kVA
• Protection type (IP): 21
• Dimensions L x W x H (mm): 400 x 250 x 300
• Weight (kg): 9.5
• Delivery contents:
- Earth clamp with cable (1.6 m/ø 16 mm2): yes
- Electrode holder with cable (2 m/ø 16 mm2): yes
- Steel rod electrodes ø 2.5 mm 11 x
- Steel rod electrodes ø 3.2 mm 9 x

• Additional delivery contents:
• LCD Master 9/13G Iron welding helmet
- Brightness level: 4
- Darkness level: 9 – 13
- Shutter speed: 0.3 ms
- Opening time: automatic
- Settings: sensitivity, time, level, loops
- Field of view (mm): 92 x 42
- Weight (g): 450
- Areas of application: MMA 10-400, WIG 10-300, MIG/MAG 10-400
- Standards: EN 175, EN 379