Jung control unit 1-10V 4-way KNX REG 2194REGHM

• Division units: 4
• Nominal voltage KNX: DC 21-32 V SELV
• Control voltage: 1-10 V
• Control current per output: max. 100 mA
• Contact type: floating relay contacts (μ-contact)
• Switching voltage AC: AC 250 / 400 V
• Switching voltage DC: DC 12-24 V
• Switching current DC: 16 A
• Switching and brightness setting for lamps with operating devices with 1-10 V interface
• Switching of electrical loads
• Manual actuation of the relay independently of the bus

• Current consumption KNX: max. 6 mA
• Power loss: max. 4 W
• Ambient temperature: -5 to +45°C
• Control outputs:
- Cable length: max. 500 m (0.5 mm²)
• Switching outputs:
- Switching current 230 V AC1: 16 A
• Switching current 230 V AC3: 10 A
- Switching current 400 V AC1: 10 A
- Switching current 400 V AC3: 6 A
- Fluorescent lamps: 16 AX
- Minimum switching current: 100 mA
- Inrush current 150 µs: 600 A
- Inrush current 600 µs: 300 A
- Resistive load: 3680 W
- Capacitive load: 16 A / 200 µF
Lamp loads:
• Incandescent lamps: 3680 W
• HV Halogen lamps: 3680 W
• LV halogen lamps with:
- Inductive transformers: 2000 VA
- Electronic transformers: 2500 W
• Fluorescent lamps T5/T8:
- Uncompensated: 3680 W
- Parallel-compensated: 2500 W / 200 µF
- Duo circuit: 3680 W / 200 µF
• Compact fluorescent lamps:
- Uncompensated: 3680 W
- Parallel compensated: 2500 W / 200 µF
• Mercury vapour lamps:
- Uncompensated: 3680 W
- Parallel-compensated: 3680 W / 200 µF
Connection outputs:
• Connection type: Screw terminals
- Single-wire: 1 x 0.5 ... 4 mm²
- Flexible without ferrule: 1 x 0.34 ... 4 mm²
- Fine stranded with ferrule: 1 x 0.14 ... 2.5 mm²
• Switching capacitive loads and the resulting high inrush currents
• Flexible assignment of control inputs to switching outputs, e.g. for controlling RGBW lamps
• Operation of the switching outputs as a switching actuator
• Connection of different phase conductors possible
• No additional power supply required
• Feedback of switching status and brightness value
• Switching position indicator
• Burn-in function for Fluorescent lamps
• Switch-on and dimming behaviour adjustable
• Time functions: Switch-on, switch-off delay, staircase light switch with pre-warning function
• Integration into light scenes
• Operating hours counter