Universal rotary dimmer, flush-mounted

• For off/changeover switching
• With Pressure off/changeover switch and rotary control
• Soft start
• Fully automatic load detection R,L,C therefore optimum adaptation of the dimming mode leading edge phase control or trailing edge phase control
• Rated load:
- LED lamps: 3-225 W
- Incandescent lamps, high-voltage/low-voltage Halogen lamps with electronic transformer: 3-250 W
• Phases on/off suitable
• Integrated overheating and overload protection
• Short-circuit protection with automatic fuses
• Extra thin design (24 mm)
• Ink. Adapter set compatible with most Covers
• Claws and screw fastening

Additional benefits:
• Automatically sets optimal operating point on the characteristic curve (as did the predecessor). Minimum brightness is manually adjustable
• Automatically corrects waveform to avoid pulses
• Automatically minimises insertion loss below 1%, i.e. dynamic reduction of voltage drop at the dimmer
• Dimming range can be extended up and down with Deep Dimming Compensation
• Silent dimming
• Dimming curve matched to the brightness sensitivity of human eyes over entire range and particularly in the lower range