Solar SF 2-way zone valve with limit switch DN 25 230VOrder no.: 97 014 16 ![]()
XXX.XX
€/unit
|
XXX.XX
€/unit
immediately available Description The zone valves are installed in closed circuits in Heating and solar systems. With manual operation, lockable in centre position • With integrated limit switch Technical data: • Power consumption: 6W • Electrical connection: 230 V, 50 Hz • Limit switch: 3 A, 250 V (AC) • Protection class: IP 22 • Ambient temp. max.: 60°C • Medium temperature: 5°C to 130°C • Operating pressure max.: 10 bar • Valve body, cover: Brass • Return spring: stainless steel • Cable length: 1000 mm • Differential pressure max.: 0.9 bar • Water with up to 50% glycol • Differential pressure max.: 0.9 bar • Connections: Internal thread Mode of operation: If the power supply is activated, the servo motor pushes the ball (against the spring force) from A to a middle position in roughly 10 seconds. When no current is applied, the return spring pulls the ball back to A in roughly 4 seconds. Permitted installation positions: motor at the top or on the side! See catalogue
To product family Questions regarding itemPlease login beforehand Add to a listPlease login beforehand |
Kvs value: | 9 |
Size: | DN 25 (G 1") |
Brand: | mut |
Design: | Two-way |
Housing material: | Brass |
Connection size: | DN 25 |
Connections: | Internal thread |
Pressure level: | PN 10 |
Max. Differential pressure in open position [bar]: | 0.9 |
Max. medium temperature (continuous operation) [°C]: | 130 |
Min. medium temperature (continuous operation) [°C]: | 5 |
Surface protection: | Untreated |
Kvs value: | 9 |
Mains voltage: | 230 V AC |
Frequency: | 50 Hz |
Control signal: | Two-point |
With limit switch: | ✓ |
Manual operation: | ✓ |
Running time [s]: | 10 |
Protection type (IP): | IP22 |
Power consumption [W]: | 6 |
Ambient temperature [°C]: | 0 - 60 |
Products |