Solenoid valve, servo-controlled G 1'' DN 25, 0.5-40 bar, brass de-energised 230 V 50-60 HzOrder no.: 95 013 08
XXX.XX
€/unit
currently not in stock Description • For use with neutral, gaseous and liquid media • Normally closed (open on request) • The specified minimum pressure must always be present as the differential pressure for perfect functioning of the servo control • Installation position: any • Seal: NBR • Medium temperature: -10°C to +80°C • With magnetic coil and device plug • Voltage: 230 volts, 50 Hz • Protection type: IP65 • 100% ED-VDE0580 • Made in Germany • Permissible pressure: 0.5 - 40 bar • Working with min. 0.5 pressure differential • Small magnet system and compact design • Valve closed in rest position (NC). When current is applied, the solenoid opens the pilot hole and pressure builds up above the piston. The higher pressure under the piston then lifts it from the valve seat. The specified minimum pressure must always be present as the differential pressure. PTFE seat seal. See catalogue
To product family Questions regarding itemPlease login beforehand Add to a listPlease login beforehand |
Manufacturer item no.: | G051.000119.090.009.090 |
Type: | B 5125 1001 182 |
Size: | DN 25 (1") |
L x H [mm]: | 96 x 112 |
Cv value [m³/h]: | 13.0 |
Brand: | GSR® |
Housing material: | Brass |
Sealing material: | NBR (nitrile rubber) |
Connection 1: | Internal thread |
Connection 2: | Internal thread |
Connection size: | 1 inch (25) |
Max. medium temperature (continuous operation) [°C]: | 80 |
Min. medium temperature (continuous operation) [°C]: | -10 |
Max. Ambient temperature [°C]: | 35 |
Design: | Straight |
Indirectly actuated: | - |
Emergency manual operation: | None |
Supply voltage [V]: | 230 |
Frequency of the input voltage [Hz]: | 0 - 50 |
Duty cycle: | 100 % |
Protection type (IP): | IP65 |
Kvs value: | 13 |
Height [mm]: | 112 |
Products |