Changeover valve Rotodivert-M, model EMV 110-F3L

Compact drive motor with a 3-way brass Changeover valve. For installation in closed heating systems, e.g. from Heating to domestic hot water charging or oil/gas boiler to solid fuel boiler.
• With Relay for 2-point control and for parallel operation of several actuators
• External connection via the connection cable (1 m long)
• Limit switch signal in position B-AB (e.g. for controlling the Pumps)
• Manual manual adjustment
• Anti-blocking function: in the event of a blockage, the motor changes direction and attempts to release the blockage

Technical data:

Drive
• Nominal voltage: 230 V, 50 Hz / IP44
• Output: 9 W in operation, 5 W in standby
• Limit switch: 1(1) A, 250 V / 50 Hz
• Operating time at 90 °: 18 s
• Connection cable: 1 m (4x 0,5 mm²)
• Torque: max. 8 Nm
• Ambient temperature: 0 ° to 55 °C, non-condensing

Changeover valve
• Material: brass
• Seals: O-rings, VITON, EPDM
• Max. operating pressure: 10 bar
• Differential pressure: max. 1 bar
• Adjustment angle: 90°
• Operating temperature: 2°C to 110°C
• Leak rate: approx. 0.2% of Kvs
• Medium: Heating water or water mixture (glycol max. 50%, for frost and corrosion protection)