0
WATCHLISTS
You must login before you can use the watchlist functions.
0
BASKET
You must login before you can use the basket functions.
   |
Air and dirt separator Spirocombi MB3 with magnet, 22mm clamp connection, universalOrder no.: 90 044 75 
XXX.XX
€/unit
|
XXX.XX
€/unit
immediately available Description • A micro air bubble and dirt separator combined with a performance-enhancing external magnet for cooling and hot water systems • Variable connection that can be rotated 360 degrees for vertical, horizontal, or even diagonal pipelines • Flow abatement in the separation chamber via a special spiral pipe enables air, micro air bubbles, magnetic and non-magnetic dirt and sludge particles to be removed continuously in the event of very low pressure loss • Very high magnetite separation rate via two external, non-wetted Neodym permanent magnets • Leakage-free Technical data: • Housing material: brass • Max. operating temperature: 110°C • Max. operating pressure: 10 bar • Media: water/glycol up to 50% • Max. flow speed: 1 m/s • Connection to the air outlet: DN15 (1/2”) ET See catalogue
To product family Questions regarding itemPlease login beforehand Add to a listPlease login beforehand |
| L [mm]: | 120 |
| Connection: | clamping ring 22mm |
| Flow rate [m³/h]: | 1,3 |
| Brand: | SPIROTECH |
| Separator type: | Air/dirt/magnetite |
| Pipe outside diameter [mm]: | 22 |
| Connection: | Compression ring |
| Working principle: | Impulse |
| Flow rate [m³/h]: | 0 - 1.3 |
| Pressure level: | PN 10 |
| Material: | Brass |
| With magnesium protection anode: | - |
| With demineralisation cartridge: | - |
| With removable magnet: | - |
| Suitable for Heating: | ✓ |
| Suitable for cooling: | ✓ |
| With drain cock: | ✓ |
| Surface protection: | Untreated |
| Max. medium temperature (continuous operation) [°C]: | 110 |
| Installation length [mm]: | 120 |
Data sheets
