Heating control system Lago 0321 incl. AF, VF, KF/SPF Manual DOrder no.: 61 016 59
XXX.XX
€/unit
|
XXX.XX
€/unit
immediately available Description • To control: 1 x heat generator, one-level - 1 x direct heating circuit 1 x mixing heating circuit (3-point PI controller) - 1 x hot water Alternatively the pump relay of the direct heating circuit can also be used for the following functions: • Circulation pump • Return flow boost • Collector pump If a heat generator sensor cannot be connected, the device can be used for a mixer add-on. If a heat generator sensor is connected and an valid address is configured (BUS-ID), the heat generator can be used in a cascade. This can then be controlled by a system manager. • Delivery contents: - 1 x Lago 0321 - 1 x external sensor - 1 x flow contact sensor 1 x boiler sensor/storage sensor 1 x wall base • Outdoor-temperature-based boiler temperature control • Safety temperature limiter test • Sensor selection (5kΩ NTC or 1kΩ PTC) Frost protection function • Cascadable • Anti-Legionella function • Mounting type: Wall mounting Technical data: • Operating voltage: 230 V, 50 Hz • Power consumption: max. 5 VA • Relay switching capacity: 250 V AC 2 (2) A • Max. current via terminal L1': 6.3 A • Protection type (DIN EN 60529): IP 40 • Protection class (DIN EN 60730): II / protection insulated • Ambient temperature: 0°C to 50°C See catalogue
To product family Questions regarding itemPlease login beforehand Add to a listPlease login beforehand |
Brand: | elster |
Number of mixed groups: | 1 |
Weather-controlled function: | ✓ |
Demand-led room control: | ✓ |
Fixed value Function: | ✓ |
Thermostats function: | ✓ |
Internet connection optional: | - |
Room operating unit optional: | ✓ |
Optional extension modules: | ✓ |
Screed drying function: | - |
Number of sensor inputs: | 5 |
Number of output relays: | 6 |
Contact load ( A) Output relay: | 2 |
with phase control: | - |
Single-stage Heat generator: | ✓ |
Two-stage Heat generator: | - |
Heat generator 0-10 Volt: | - |
Heat generator OpenTherm: | - |
Supply voltage:: | 230 V |
Wall mounting: | ✓ |
Suitable as plug-in controller: | - |
Protection type (IP): | IP40 |
Products |