Differential temperature controller DeltaSol CS Plus incl. 4 sensorsOrder no.: 97 023 79
XXX.XX
€/unit
|
XXX.XX
€/unit
immediately available Description No limit switch For use in closed heating and solar circuits. “Up/Down” function for shutting off or switching. Normally closed (2-way), AB-B normally open (3-way). They can be used for manually filling, rinsing, venting or draining the system via a built-in lever. Technical data: • Max. operating pressure: 10 bar • Max. differential pressure: - DN 15 (1/2“) = 1.4 bar - DN 20 (3/4“) = 0.7 bar - DN 25 (1“) = 0.6 bar • Operating temperature: -20 to + 160°C • Operating voltage: 230 V/AC • Power consumption: 6 W • Opening/closing time approx.: <12 sec./6 sec. • Medium: water with up to 50% glycol • Valve body material: brass • Paddle material: EPDM • Cable length: 0.6 m Permitted installation positions: motor at the top or on the side! See catalogue
To product family Questions regarding itemPlease login beforehand Add to a listPlease login beforehand |
Manufacturer item no.: | 115 003 00 |
Brand: | RESOL® |
Number of differential temperatures: | 2 |
Weather-controlled function: | - |
Demand-led room control: | - |
Fixed value Function: | - |
Thermostats function: | ✓ |
Internet connection optional: | ✓ |
Room operating unit optional: | - |
Optional extension modules: | - |
Screed drying function: | - |
Sensor type: | Pt1000 |
Number of sensor inputs: | 4 |
Number of output relays: | 2 |
Contact load ( A) Output relay: | 1 |
Number of PWM/0-10 V outputs: | 2 |
with phase control: | ✓ |
Single-stage Heat generator: | - |
Two-stage Heat generator: | - |
Heat generator 0-10 Volt: | - |
Heat generator OpenTherm: | - |
Supply voltage:: | 230 V |
Wall mounting: | ✓ |
Suitable as plug-in controller: | - |
Height [mm]: | 172 |
Width [mm]: | 110 |
Depth [mm]: | 46 |
Protection type (IP): | IP20 |
Products |