Electrode manual welding inverter single phase type PROGYS 220 E FV CEL

• Suitable for all common rutile and basic wrapped rod electrodes to be welded on direct current (steel, stainless steel, cast-iron etc.)
• ARC FORCE: Stabilises the arc by correcting the voltage if the electrode’s distance to the weld metal changes. Adjustable from 0-100%
• HOT START: Improves ignition properties by briefly increasing welding current. The arc ignites instantly in a reliable manner. Adjustable from 0-100%
• ANTI STICKING: Helps to reduce the tendency of the electrode to stick in the weld pool.

• TIG
- Can be switched to TIG operation at the touch of a button
TIG Lift: contact ignition with non-melting tungsten electrodes with direct current (DC).
TIG Lift Pulse: limits the melting temperature and allows welding of sheets from 0.3 mm.
- With TIG Lift ignition
- AUTO DOWN SLOPE: The welding current is brought down continuously by the down-slope function

• Welding method: TIG + electrodes
• Cutting: no
• Current: 5-250 A
• Welding filler materials: Electrodes ø 1.6-5 mm
• Wire coil: no
• Wire guide rolls: no
• Voltage (V): 230
• Control panel: digital
• Generator-compatible max: 10 kW/12.5 kVA
• Protection type (IP): 23
• Dimensions L x W x H (mm): 405x340x215
• Weight (kg): 12