Flanged heater AHFOR-BI-E-15.0, 15.0 KW 400 V/AC, flange Ø 180mm, installation length: 780 mmOrder no.: 97 028 56
XXX.XX
€/unit
currently not in stock Description The Askoheat heating rods are generally suitable for PV systems, but only depending on the controller installed on-site For use in hard water, descaling measures must be taken and/or the heating coil must be descaled (initially after 3 months, then at regular intervals). Limescale can trigger the safety limiter, or lead to thermal destruction and/or pitting of the heating coil, thus voiding the warranty! • For heating domestic and heating water • Unheated zone: 70 mm • For bolt circle ø 150 mm / 8xM12 • Suitable for continuous operation • With temperature controller/limiter combination and operating lamp • Setting range: OFF/Frost-protection/15°C-95°C • To control the controller and the limiter, a power contactor must be installed externally on each side See catalogue
To product family Questions regarding itemPlease login beforehand Add to a listPlease login beforehand |
Manufacturer item no.: | 012-1651 |
Overall length [mm]: | 780 |
Op. voltage: | 3 x 400 V (AC) |
capacity [kW]: | 15.0 |
Brand: | ASKOMA |
Connection 1: | Flange |
Rated voltage 1 [V]: | 400 |
Number of power levels: | 1 |
Connection type: | Flange |
Flange diameter [mm]: | 180 |
Immersion depth [mm]: | 780 |
Operating pressure [bar]: | 10 |
Material of heating element: | Stainless steel |
Temperature setting [°C]: | 15 - 95 |
safety temperature limiter: | ✓ |
Max. power [W]: | 15,000 |
Products |