Thermostatic valve body IMI Heimeier Eclipse DN15(1/2")x 3/4",double angle left"Order no.: 90 881 89 ![]()
XXX.XX
€/unit
immediately available Description For installation in heating and cooling systems. The complete thermostat insert can be replaced with the Heimeier assembly device, without draining the system. • Automatic hydraulic balancing by integrated flow rate controller, thus the flow rate in the radiator is never exceeded, even if the neighbouring valves close • The required flow rate of the individual radiators is set directly on the thermostat valve body • The flow rate can be continuously adjusted within the flow range using the setting key, setting 1-15 • Flow range from 10 to 150 l/h • Th-head connection: M30x1.5 Technical data: • Valve material: nickel-plated gunmetal, corrosion-resistant • Coil material: Niro steel spindle with double O-ring seal • O-ring material: EPDM • Max. operating pressure: 10 bar • Max. operating temperature: 100 °C • Min. operating temperature: -10°C • Max. differential pressure: 60 kPa • Min. differential pressure: - 10-100 l/h = 10 kPa - 100-150 l/h = 10 kPa See catalogue
To product family Questions regarding itemPlease login beforehand Add to a listPlease login beforehand |
Length [mm]: | 58 |
Connection: | left |
Size: | DN 15 (1/2”) |
Ref. no.: | 3938-02.000 |
Brand: | HEIMEIER |
Thermostats control element dimensions: | M30 x 1.5 |
Colour: | Nickel-plated |
Design: | Outer thread/outer thread |
Radiator connection size: | DN 15 (1/2") |
Presetting the heating valve: | ✓ |
Dynamic flow regulator: | ✓ |
Suitable for single-pipe system: | - |
Material: | Red cast iron |
Surface protection: | Nickel-plated |
Suitable for two-pipe system: | ✓ |
Opposite flow direction: | - |
Max. Flow capacity (min. 10 kPa) [l/h]: | 0 - 150 |
Products |