Thermaqua Basic actuator M 30 x 1.5 ETOrder no.: 90 550 00
XXX.XX
€/unit
immediately available Description • Simplified mounting with FirstOpen function; the locking mechanism opens the actuator and it can be fitted to the valve without applying much force. • Before commissioning, the locking mechanism is removed by a handle; the actuator can be used immediately (fig. 1). • With top position display, the actuator is energised and the valve is open when the pin is extended (fig.2). Technical data: • Connection thread M 30 x 1.5 mm • Normally closed (NC) • Operating voltage: 230 V / 50 Hz • Temporary switch-on: 195 mA • Continuous current: 9 mA • Power consumption: 2 W • Closing and opening times: approx. 3 min • Stroke: approx. 3.5 mm • Spring force: 90 N (± 10%) • Protection type: IP 40 • Connection cable: 1 m, 2 x 0.75 mm² • Dimensions (W x H): 39 x 63 mm See catalogue
To product family Questions regarding itemPlease login beforehand Add to a listPlease login beforehand |
Model: | Normally closed (NC) |
Power supply: | 230 V/AC |
Connection to valve: | M30 x 1.5 |
Mains voltage: | 230 V AC |
Control signal: | Two-point |
Function: | Deactivated when closed NC |
Automatic stroke detection: | - |
Protected against overvoltage: | - |
First open: | ✓ |
With position indicator: | ✓ |
Manual operation: | - |
Length of connection cable [m]: | 1 |
Running time [s]: | 180 |
Stroke length [mm]: | 3.5 |
Colour: | White |
Ambient temperature [°C]: | 0 - 60 |
Power consumption [W]: | 2 |
Protection type (IP): | IP40 |
Height [mm]: | 63 |
Diameter [mm]: | 39 |
Products |