• Connections: DN 10 (3/8")
• Variable installation as top or under-sink device
• Only for one tapping point
• Hydraulically controlled small instantaneous water heater
• Replaceable heating element
• Incl. jet control
• The Installation set (order no. 90 806 85) is required for pressure-resistant under-sink installation
• 3.5 kW ready to plug in, from 4.4 kW mains cable
Area of application:
• Washbasin
• Washrooms in offices, sports facilities and shops
Model |
EPO2-3
|
EPO2-4
|
EPO2-5
|
Technical data |
Energy efficiency class |
A*) |
A*) |
A*) |
Nominal power [kW] |
3.5 |
4.4 |
5.5 |
Permissible operating pressure [bar] |
6 |
6 |
6 |
Water connections (screw connections) |
DN 10 (3/8") |
DN 10 (3/8") |
DN 10 (3/8") |
Hot water flow rate at Δt = 30 K [l/min] |
1.7 |
2.1 |
2.7 |
Max. switch-on flow rate [l/min] |
1.2 |
1.6 |
2.0 |
Voltage [V] |
230 |
230 |
230 |
Nominal current [A] |
15.2 |
19.1 |
23.9 |
Min. required cable cross-section [mm2] |
3 x 1.5 |
3 x 2.5 |
3 x 2.5 |
approx. weight with water filling [kg] |
1.2 |
1.2 |
1.2 |
Dimensions (W x H x D) [mm] |
225 x 170 x 75 |
225 x 170 x 75 |
225 x 170 x 75 |
Humidity protection level according to VDE |
IP 25 |
IP 25 |
IP 25 |
|
*) The information complies with the provisional requirements of EU Ordinance 812/2013, mandatory as of September 2015 |