0
WATCHLISTS
You must login before you can use the watchlist functions.
0
BASKET
You must login before you can use the basket functions.
  |
Pressfitting f.MSVR TH contour mounting plate with 2 fittings 18x2mm - 1/2"Order no.: 90 064 54 
XXX.XX
€/unit
|
XXX.XX
€/unit
immediately available Bulk prices
Description • A system for plumbing, heating and compressed air installations (oil-free) • Suitable for drinking water in accordance with UBA whitelist • Fitting body made of brass • Stainless steel pressing sleeve • Compressed air: up to 10 bar • Temperature max.: 95°C / pressure max.: 10 bar • Sealing with two O-rings • Not leak-tight until grouted • Approved for: TH contour up to 50 x 4 mm U-contour 16x2 mm and 20x2 mm • GCVW system approval with test certificate • With 2 fittings • Actual dimension: 153 mm *No DVGW approval See catalogue
To product family Questions regarding itemPlease login beforehand Add to a listPlease login beforehand |
| Size: | 18 x 2 mm - DN 15 (1/2")* |
| Brand: | evenes |
| Unpressed leaking: | ✓ |
| Material: | Brass |
| Transitional: | - |
| Multi-part: | - |
| System-bound: | ✓ |
| DVGW seal: | - |
| Suitable for drinking water according to UBA positive list: | ✓ |
| Outer pipe diameter connection 1 [mm]: | 18 |
| Wall thickness connection 1 [mm]: | 2 |
| Connection 1: | Pressure sleeve |
| Nominal inside diameter connection 2: | 1/2 inch (15) |
| Connection 2: | Internal thread |
| Outer pipe diameter connection 3 [mm]: | 18 |
| Wall thickness connection 3 [mm]: | 2 |
| Connection 3: | Pressure sleeve |
| Nominal inner diameter connection 4: | 1/2 inch (15) |
| Connection 4: | Internal thread |
| Contour code: | TH |
| Sealing material: | EPDM |
| Max. operating pressure [bar]: | 10 |
| Max. medium temperature (continuous operation) [°C]: | 95 |
| With sealing material: | ✓ |
Certificates
