alre
- Temperature sensor with clock and set point adjuster
- „Berlin 3000“ housing design, programming for every day is known by mechanical timers using „electronic tabs“ (minimal switching time 15 min)
- Lowering can be adjusted via clock
- Temperature sensor with set point adjuster
- With „Comfort/ECO“ operating mode switch
- „Berlin 1000, super flat“ building design
- Temperature sensor with set point adjuster
- „Berlin 1000, super flat“ building design
- Lowering: 4 K (fixed) can only be activated via master-slave mode with a clock transmitter
- 1-channel wireless receiver
Technical data: - Operating voltage: 230 V~, 50 Hz
- Transmission frequency: 868.3 MHz
- Technical data:
- Switching capacity: 15 (8) A, 24–250 V ~, for 24 V ~ min. 150mA
- Switching differential: > = 1 m / s
- Protection class: IP40
- Protection class: I
- Suitable for heating technology, ventilation technology and for controlling and monitoring temperatures on pipes
- For capillary, frost protection thermostats, HF, screed mounting, JET, JMT, WR 81, sleeve probe ø 7 mm
- Connection thread DN 15 (1/2”)
- For industry and heating systems
- Ready-to-use paste in dispenser
- Working temperature range: -40°C to 150°C
- Thermal conductivity: > 0.7W/mK, R
- Protection type: IP20
- Protection class: II
- For wiring of 230 V controllers and valve actuators
- Protection type: IP54
- Protection class: I
- Suitable for industrial, exhibition and air halls and greenhouses
- Protection type: IP30
- Protection class: 0, determined by installation location
- Used for monitoring the temperature in switch cabinets, machines and housings
- Protection type: IP30
- Protection class: II
- Electromechanical, for controlling and monitoring temperature
- Protection type: IP30
- Protection class: III
- Electromechanical, for controlling and monitoring temperature
- Protection type: IP30
- Protection class: II
- Electromechanical, for controlling and monitoring temperature
- Protection type: IP30
- Protection class: II
- Electromechanical, for controlling and monitoring temperature
- Protection type: IP30
- Protection class: II
- Electromechanical, for controlling and monitoring temperature
- With side fixing screw
- Internal ø: 6.3 mm
- Connection: DN 15 (1/2")
- Protection type: IP65
- Protection class: III
- Temperature measurement for liquid or gaseous media
- Protection type: IP30
- Protection class: II
- Electromechanical surface-mounted room thermostat for controlling and monitoring temperature
- Protection type: IP30
- Protection class: II
- Electromechanical
- Protection class: IP30
- Protection class: II
- Especially for heating and cooling control in 2-pipe systems
- For room-temperature controlled operation
- The room temperature sensor is connected to the control system of the condensing boiler; the time program and the room temperature are set on the condensing boiler
- Installation location: Reference room (e.g. living room)