Bachler

• For car tyres and diaphragm expansion vessels
  
• With digital display
  
• Measuring range: 0.1 to max. 7 bar, graduation 0.1 bar
  

• Consisting of:
  - 1 x special cleaning brush
  - 1 x Starlock blade (smooth, 0.4 mm)
  - 1 x Starlock blade (serrated, 0.4 mm)
  - 1 x round heat exchanger cleaning spatula
  - 1 x heat exchanger cleaning blade, serrated
  - 1 x spray lance
  - 1 x nylon wire disc brush incl. 300 mm extension
  - 3 x steel-free cleaning fluid
  - 1 x Meta box with foam insert

• With lighting function
  
• For fast and accurate frost protection measurement of solar, thermal pump and cooling system liquids
  
• For measuring the ice flaking point at which the frost protection agent begins to freeze
  

• With Starlock holder for all standard oscillators (Fein, Bosch, Makita,..)
  
• For heavy soiling
  
• Angled to 90°
  

• For Service and maintenance of heat exchangers from various boiler manufacturers
  
• Consisting of:
  - 1 x special cleaning brush
  - 1 x Starlock blade, smooth (0.4 mm)
  - 1 x Starlock blade serrated (0.4 mm)
  - 1 x Heat exchanger cleaning spatula with serrated attachment 0.4 mm
  - 1 x heat exchanger cleaning spatula with serrated plastic attachment 0.5 mm
  - 1 x Leak stopper (yellow) for sealing the gas pipe
  - 1 x inspection stickers (12 pieces)
  - 1 x nylon disc brush 100 mm (steel-free) with Bit holder incl. 30 cm Bit holder extension
  - 1 x Cleaning gun with 2 lance attachments (30° and 90°) for Sinks of the heat exchanger
  - 1 x rear wall protector for heat exchanger condensing boilers
  - 1 x Flexible siphon brush for the condensate drain
  - 1 x replacement spatulas (6 x plastic serrated 0.5 mm, 2 x stainless steel serrated 0.4 mm)
  - 1 x Steel-free cleaning fleece (3 pcs.)
  - 1 x L-BOXX system case incl. foam insert

• Service case with measuring and maintenance instruments for heating water
  
• Observe the relevant standards and guidelines (VDI 2035 and ÖNORM 5195-1)
  
  Consisting of:
  
• Digital pH-meter
  

• Maintenance tools for Cleaning and maintenance for air, water, Heat pumps and air conditioning systems
  
• Incl. manual suction blower
  
• Handy system case
  

• Maintenance tools for cleaning and servicing air and water Heat pumps and air conditioning systems
  
• Handy system case
  
• Consisting of:
  - Spray lance
  - Cold spray, flammable, 100 ml
  - Leak detection spray, 125 ml
  - Heat pumps and air conditioning system fin brush
  - Heat pumps fin comb (for narrow areas)
  - Heat pumps fin comb (with sturdy red PVC handle)
  - Heat pumps fin spanner comb (12 spacings)
  - 2x Heat pumps and air conditioning Cleaner in spray bottle, 0.5 litre
  - Heat pumps cleaning brush with wooden handle for condensate water
  - Storage compartment on magnetic plate
  - Inspection stickers (12 stickers)
  - Adapter for spray lance for cleaning with compressed air
  - Flexible cleaning brushes (Traps)

• For mechanical Cleaning of the gaps in stainless steel heat exchangers
  
• Suitable for Viessmann, Vaillant, Remeha, Baxi, Brötje, Fondital, ... among others
  
• Blades with serrated or round design (depending on the degree of soiling of the heat exchanger)
  

• Suitable for: Baxi, Brötje, Fondital, Vaillant, etc.
  
• With T-handle for practical installation on the rear wall of the heat exchanger
  
• Dimensions (Ø x D): 190 x 47 mm
  

• With hexagonal holder

- For cleaning evaporator fins in heat pumps or air conditioners.- White PVC handle with brown soft cleaning bristles- Brush width: 75 mm ...

• With hexagonal holding clip

• Display: LCD illuminated
  
• Display range: 1999
  
• Voltage range AC: 200 V - 600 V
  

- Foldable PVC water container 20 l with handles (portable, can be hung up) and mouldable top edge.- For emptying of any kind- Ø: 300 mm ...

• With hand refractometer, compass, Multimeters, PH test strips
  
• Pressure measurement for expansion tanks
  
• Test badges for solar systems

- For cleaning and rectifying evaporator fins in heat pumps or air-conditioning units.- Metallic bristles- With large PVC handle- Brush width: 40 mm ...

• For pressure testing of pipe systems with compressed air or water
  
• Reusable plug-in adapters
  
• 3 plug-in adapters for metal pipes 15, 18, 22 mm
  

• Consisting of:
  - 9 x PVC boxes a 25 pieces (flow, return, hot water, cold water, circulation, gas, expansion tank, heating fill water, universal)
  - 1 x PVC box, 50 pieces each Underfloor heating distributor
  - 1 x PVC box a 25 pieces arrow flow direction
  - 1 x block of electrical cable information stickers (220 pieces)
  - 1 x permanent pen
  - 1 x Brother P-Touch PTH-105 labelling device
  - 1 x Replacement tape for Brother P-Touch PTH-105 labelling machine, 12 mm
  - 1 x Meta box with foam insert

- Hardness measuring liquid 15 ml (1 drop = 1 degree dH) and PVC cup ...

• For magnesium and impressed current anodes
  
• Measurement functions:
  - Protection current (0-2200 mADC)
  - Drive voltage (0-20 VDC)
  - Alternating voltage (0-300 VAC)
  - Diodes continuity test (1 mA / 2.0 V)
  - Insulation test (0-2 kΩ)
  - Resistance measurement control sensor (0-20 kΩ)
  - Battery type 9 V
  
• Including connection cable with test probes
  

• For heavy soiling
  
• Material: Stainless steel V2A
  
• Blade thickness: 0.4 mm
  

• For measuring and filling Diaphragms expansion tanks
  
• Scope of delivery:
  - 1 x digital pressure gauge with valve clamp connection and connection for vessel filler (item 1)
  - 1 x Compressed air hose coupling (item 2)
  - 1 x Valve connection extension for Pressure gauge (Pos.3)
  - 1 x 400 ml container filler can (item 4)
  - 1 x sealing pliers (item 5)
  - 3 x cranked valve adapters (various Angles) for MAG valves that are difficult to access (Pos.6)
  - 10 x lead seals incl. fixing wire (item 7)
  - 12 x test tags (item 8)
  - 1 x thread sealing tape (Teflon) (item 9)