gebo

• A system for steel pipes DIN EN 10255 (previously DIN 2440/2441), DIN 2442 and DIN 2448/2458 Series 1, ISO 65
  
• For sealing holes, cracks and porous sections
  
• Temperature max.: +90 °C for hot water, drinking water up to 25°C
  

• A system for water, building connection lines for gas supply (gas outside buildings), fire extinguishing lines, compressed air lines, filling lines for heating oil up to 2” according to DIN 51603-1 (observe the Technical Regulations for Combustible Liquids (TRBF))
  
• Suitable for drinking water in accordance with UBA whitelist
  
• The rubber form ring must be replaced for use in drinking water systems. As prescribed by the elastomer guideline DIN EN 681-1.
  

• A system for water, building connection lines for gas supply (gas outside buildings), fire extinguishing lines, compressed air lines, filling lines for heating oil up to 2” according to DIN 51603-1 (observe the Technical Regulations for Combustible Liquids (TRBF))
  
• Suitable for drinking water in accordance with UBA whitelist
  
• The rubber form ring must be replaced for use in drinking water systems. As prescribed by the elastomer guideline DIN EN 681-1.
  

• A system for copper pipes DIN EN 1057 (previously DIN 1786)
  
• For sealing holes, cracks and porous sections
  
• Max. temperature +90°C for water
  

• A system for sealing holes, cracks and porous
  sections in water pipes
  
• Sealing collar has strong honeycomb structure (EPDM, KTW
  approved) for better levelling of pipe unevenness
  
• Max. temperature +90°C for water
  

• A system for water, building connection lines for gas supply (gas outside buildings), fire extinguishing lines, compressed air lines, filling lines for heating oil up to 2” according to DIN 51603-1 (observe the Technical Regulations for Combustible Liquids (TRBF))
  
• Suitable for drinking water in accordance with UBA whitelist
  
• The rubber form ring must be replaced for use in drinking water systems. As prescribed by the elastomer guideline DIN EN 681-1.
  

• A system for steel pipes DIN EN 10255 (previously DIN 2440/2441),
  DIN 2442 and DIN 2448/2458 Series 1, ISO 65
  
• For sealing holes, cracks and porous sections
  
• Max. temperature +90°C for water
  

• Brass clamp connectors for multi-layer composite piping from various manufacturers
  
  
• Extreme flexibility dur to the modular system (one body for each external diameter, different support bodies for different internal diameters)
  
• Heating pipe repairs
  

• Brass clamp connectors for multi-layer composite piping from various manufacturers
  
  
• Extreme flexibility dur to the modular system (one body for each external diameter, different support bodies for different internal diameters)
  
• Heating pipe repairs
  

• For converting malleable cast iron clamp connectors for drinking water applications
  
• Including identification sticker
  
• According to elastomer guideline DIN EN 681-1
  

• A range of 7 sealing taps and sealing clamps for repairing 15 mm pipe up to 51 mm pipe.
  
  Contents:
  
• 5 x Unifix Mini, length: 60 mm for the following external pipe diameters: 21-25 mm, 26-33 mm, 33-37 mm, 42-45 mm, 48-51 mm
  
• 2 x brass sealing clamp for the following external pipe diameters: 15 and 18 mm

• A system for water, compressed air, heating oil (only 57 mm, observe the Technical Regulations for Combustible Liquids (TRBF))
  
• Fitting body made of malleable cast iron
  
• Steel clamping ring
  

• Compact adapter with clamp connection
  
• For steel pipes in accordance with DIN EN 10255 and DIN EN 10220 series 1
  
• Suitable for wall and floor installation
  

• A system for water, building connection lines for gas supply (gas outside buildings), fire extinguishing lines, compressed air lines, filling lines for heating oil up to 2” according to DIN 51603-1 (observe the Technical Regulations for Combustible Liquids (TRBF))
  
• Suitable for drinking water in accordance with UBA whitelist
  
• The rubber form ring must be replaced for use in drinking water systems. As prescribed by the elastomer guideline DIN EN 681-1.
  

• A system for water, compressed air, heating oil (only 57 mm, observe the Technical Regulations for Combustible Liquids (TRBF))
  
• Fitting body made of malleable cast iron
  
• Steel clamping ring
  

• Can be used for drinking water and heating systems
  
• UBA-compliant
  
• Temperature max.: 80°C
  

• Brass clamp connectors for multi-layer composite piping from various manufacturers
  
  
• Extreme flexibility dur to the modular system (one body for each external diameter, different support bodies for different internal diameters)
  
• Heating pipe repairs
  

- A system for drinking water and heating systems- Alternative to galvanised materials for unfavourable water conditions- Max. Temperature for drinking water 85°C, for heating water 95° C- Max. Max. pressure for water 10 bar (up to 80°), 6 bar (up to 95°C)- DVGW certified ...

• Contents:
  
• 6 malleable cast iron pipe connectors in the following versions:
  - with male thread connection DN 20 (3/4") and DN 25 (1") for steel pipe
  - with male threaded connection in DN 32 (1 1/4") x 44.5 for small flue tube
  - with female thread connection in DN 15 (1/2"), DN 20 (3/4") and DN 25 (1") for steel pipe
  
• 11 sealing clamps for sealing holes, cracks and porous areas in water-bearing pipes:
  - Malleable cast iron sealing clamps for steel pipe in DN 20 (3/4"), DN 25 (1") and DN 32 (1 1/4")
  - Brass sealing clamps for copper and stainless steel pipes in 12, 15, 18, 22, 28 mm
  - Unifix Mini stainless steel sealing strips for almost all types of pipe, each 60 mm long for the following external pipe diameters: 33-37, 42-45, 48-51 mm
  

• A range of 17 sealing taps and sealing clamps for repairing 10 mm copper pipe up to 118 mm of wastewater pipe.
  
  Contents:
  
• 9 x Unifix Mini, length: 60 mm for the following external pipe diameters: 21-25, 26-30, 33-37, 42-45, 48-51, 60-64, 69-73, 74-80 and 87-93 mm
  
• 1 x Unifix Middle, length: 100 mm for the following external pipe diameters: 108-118 mm
  

• A system for water, building connection lines for gas supply (gas outside buildings), fire extinguishing lines, compressed air lines, filling lines for heating oil up to 2” according to DIN 51603-1 (observe the Technical Regulations for Combustible Liquids (TRBF))
  
• Suitable for drinking water in accordance with UBA whitelist
  
• The rubber form ring must be replaced for use in drinking water systems. As prescribed by the elastomer guideline DIN EN 681-1.
  

• A system for copper pipes DIN EN 1057 (previously DIN 1786)
  
• For sealing holes, cracks and porous sections
  
• Max. temperature +90°C for water
  

• A system for gas installation within buildings
  
• HTB to 650°C (30 min.)
  
• NBR seal