KUTZNER + WEBER

• Made of stainless steel
  
• Suitable for draught limiter Z 150, Z 150 S and ZUK 150 S
  
• With quick release connector

• V4A stainless steel
  
• With saddle and snap lock
  
• 130 mm

• Control wheel and housing made entirely of stainless steel, brass setting weights
  
• Damping to prevent the control wheel swinging
  
• For chimney mounting with the KW pipe chuck or flue gas pipe mounting with the KW connection piece
  

• For chimney mounting with the KW pipe chuck or flue gas pipe mounting with the KW connection piece
  
• Control disc can be locked in closed position
  Technical data:
  
• Nominal diameter (mm): 150
  

• Made of stainless steel
  
• Suitable for KW draught limiter type Z
  
• For retrospective attachment to a flue gas pipe that runs on any slope

• for MOK
  
• With a limit switch (standard motor)
  
• Closed and currentless
  

• Can be adapted in diameter within the specified nominal diameter.
  
• Clamp fitting made of stainless steel
  
• approx. 60 mm wide
  

• For devices with a pilot light or solid fuels
  
• Also for oil and gas fan burners
  
• With minimal opening for low pressure flue gas systems
  

• Electrostatic particle separator with electronic units, as a secondary measure to reduce fine dust content in the flue gas from almost all wood firing systems (e.g. stoves, pellet stoves, heating inserts, wood-fired boilers, manually or automatically fed up to 50 kW).
  With DIBt-approval.
  
  Technical data:
  
• Design for exhaust pipe ø (mm): 130-250
  
• Electronic unit dimensions (HxWxD mm): 75 x 210 x 155
  

• For chimney mounting with the KW pipe chuck or flue gas pipe mounting with the KW connection piece
  
• Control disc can be locked in closed position
  Technical data:
  
• Nominal diameter (mm): 150
  

• No rattling of the control disc due to a heat and condensate resistant EPDM seal
  
• For chimney mounting with the KW pipe chuck or flue gas pipe mounting with the KW connection piece
  
• Control disc can be locked in closed position
  Technical data:
  

• For retrospective mounting of the particle separator without having to dismantle the existing cable.
  
• Stainless steel
  
• Installation length 260 mm
  

• Made of V4A stainless steel
  
• Condensate drain DN15 (½") with plug
  
• Sheet thickness: 1.0 mm
  

• Like a MOK flue gas damper, but
  
• Tight metal seal (no minimum opening) for low-pressure flue gas systems
  
• For devices with no ignition flame and no accumulation of condensate
  

• General description of Diermayer flue gas flaps
  
• Heat-controlled, connected to the device according to 3388 Part 4
  
• Suitable for type B1 gas heating appliances (capacity-controlled gas heating appliances with/ without an ignition flame, as well as flue gas monitoring)
  

made of stainless steel ...

• RV 140/200-LG, stainless steel, complete with key
  
• Nominal size: 140/200 mm

• With smooth ends to mount the particle separator in the connection cable.
  
• Stainless steel
  
• Installation length 260 mm
  

• If the natural draught is too weak, the INJEKT chimney fan ensures a steady and optimal draught in the chimney. The INJEKT chimney fan is mounted on the chimney outlet.
  Flue gas systems and chimneys have to be designed in a way that always ensures the negative pressure which is necessary for a safe flue gas evacuation.
  The rotational speed of the chimney fan can be infinitely adjusted with an optional rotational speed control (98 008 68, not included).
  
• For a chimney outlet of: 100 mm to 200 mm
  
• Output pressure: max. approx. 50 Pa
  

• Prevents impact sound vibrations and absorbs heat expansion
  
• Pipe sleeve made of stainless steel with clamping lock to both sides to adjust the diameter (difference may be up to 10 mm)

• Stainless steel V4A, surface glossy
  
• Sheet thickness 0.6 mm
  
• Mineral wool, hydrophobic (moisture resistant against flue gas condensate)
  

• General description of Diermayer flue gas flaps
  
• Heat-controlled, connected to the device according to 3388 Part 4
  
• Suitable for type B1 gas heating appliances (capacity-controlled gas heating appliances with/ without an ignition flame, as well as flue gas monitoring)
  

• General description of Diermayer flue gas flaps
  
• Heat-controlled, connected to the device according to 3388 Part 4
  
• Suitable for type B1 gas heating appliances (capacity-controlled gas heating appliances with/ without an ignition flame, as well as flue gas monitoring)
  

• Suitable for: particle separator Airjekt 1