mut

• The zone valves are installed in closed circuits in heating systems. Manual operation, can be locked in intermediate position.
  
  Technical data:
  
• Power consumption: 6 W
  
• Protection type: IP22
  

• The zone valves are installed in closed circuits in heating systems. Manual operation, can be locked in intermediate position.
  
  Technical data:
  
• Power consumption: 6 W
  
• Protection type: IP22
  

• The zone valves are installed in closed circuits in Heating and solar systems.
  With manual operation, lockable in centre position
  
• With integrated limit switch
  
  
  Technical data:
  
• Power consumption: 6W
  

• A system with a solid fuel boiler and a buffer tank are prerequisites for use
  
• For return flow boost
  
• Thermostat insert can be rotated from the outside
  Technical data:
  

• The zone valves are installed in closed circuits in heating systems. Manual operation, can be locked in intermediate position.
  
  Technical data:
  
• Power consumption: 6 W
  
• Protection type: IP22
  

• Pre-assembled with magnetite and dirt separator and automatic vent
  
• Exchange chamber made of round pipe
  
• Connection for immersion sensor DN 15 (1/2”)
  

• Suitable for installation in closed heating circuits and water lines. Can be used as changeover or mixer valve.
  
• Very quiet changeover with no water hammer
  
• Actuator can be exchanged without draining the system
  

• The zone valves are installed in closed circuits in Heating and solar systems.
  With manual operation, lockable in centre position
  
• With integrated limit switch
  
  
  Technical data:
  
• Power consumption: 6W
  

• The zone valves are installed in closed circuits in Heating and solar systems.
  With manual operation, lockable in centre position
  
• With integrated limit switch
  
  
  Technical data:
  
• Power consumption: 6W
  

• Angle of rotation: max. 90°
  
• Medium temperature: 5°C to 110°C
  
• Material, mixer: Brass
  

• Heating circuit outflows; adjacent inflow and return
  
• Separate heating circuit outflow on the side
  
• Integrated hydraulic switch
  

• Suitable for MUT Changeover valves Series VMR
  
• Power consumption: 4 W
  
• Protection class: IP40
  

• Suitable for 3-way and 4-way mixers up to DN40 from series 3000 and VMX.
  
• Can be manually adjusted by pressing and turning the rotary knob
  
• compact construction
  

• 1-pin (with relay), with 1x continuous phase and 1x control phase
  
• Suitable for MUT Changeover valves Series VMR
  
• Power consumption: 4 W
  

• - For use in heating, cooling and drinking water systems
  - Particularly suitable for systems with larger flow rates, e.g. heat pumps
  - Quick and easy disassembly of the actuator
  - With built-in relay, SPST control 1x continuous phase and 1x control phase
  - Auxiliary microswitch integrated as limit switch
  - Scope of delivery:
  - Ball valve with actuator
  - Molex cable Minifit JR6
  Technical data
  - Material ball valve: Brass CW617N
  - Operating temperature range: 2 to 90 °C
  - Operating pressure max.: 10 bar
  - Max. differential pressure: 6 bar
  - Operating voltage: 230 V/AC
  - Protection class: IP 40
  - Power consumption max.: 7 W
  - Length of connection cable: 1.0 m
  - Operating media: Water, glycol (max. 50%)
  
• Actuator operating time: 6 s / 90°
  - Incl. screw connection

• - For use in heating and drinking water systems
  - Quick and easy disassembly of the actuator
  - With built-in relay, SPST control 1x continuous phase and 1x control phase
  - Auxiliary microswitch integrated as limit switch
  - Scope of delivery:
  - Ball valve with actuator
  - Molex cable Minifit JR6
  - Screw connection
  Technical data
  - Material ball valve: Brass CW617N
  - Operating temperature range: 2 to 90 °C
  - Operating pressure max.: 10 bar
  - Max. differential pressure: 2.5 bar
  - Operating voltage: 230 V/AC
  - Protection class: IP 40
  - Power consumption max.: 7 W
  - Connection cable length: 1.0 m
  - Operating media: Water, glycol (max. 50%)
  
• Actuator operating time: 6 s / 90°

• The actuator series AS is suitable for installation on control valve series MK.
  
  Technical data:
  
• Positioning force: 250 N
  
• Lift: 15 mm
  

• Length: 1 m

• Technical data:
  
• Max. operating pressure: 10 bar
  
• Max. dynamic pressure: 5 bar
  

• The control valves of the MK series can be used as deflector, mixer and shut-off valves in heating, air-conditioning and ventilation systems and in systems for generating warm water.
  
  Technical data:
  
• Operating pressure: 10 bar
  
• Media temp.: 5–110 °C
  

• The control valves of the MK series can be used as deflector, mixer and shut-off valves in heating, air-conditioning and ventilation systems and in systems for generating warm water.
  
  Technical data:
  
• Operating pressure: 10 bar
  
• Media temp.: 5–110 °C
  

- For use in heating and drinking water systems- Quick and easy disassembly of the actuator- With built-in relay, SPST control 1x continuous phase and 1x control phase- Auxiliary microswitch integrated as limit switch- Scope of delivery:- Ball valve with actuator- Molex cable Minifit JR6- Screw conn ...

• Use:
  Suitable for installation in boiler assemblies of central heating systems.
  The mixers are suitable for left or right installation.
  
  Technical data:
  
• Size: DN25 (1")
  
• Angle of rotation: max. 90°
  

- For use in heating and drinking water systems- Quick and easy disassembly of the actuator- With built-in relay, SPST control 1x continuous phase and 1x control phase- Auxiliary microswitch integrated as limit switch- Scope of delivery:- Ball valve with actuator- Molex cable Minifit JR6- Screw conn ...