verox®

- Areas of application:- Universal for seamless, shadow-free surfaces on metal, wood or plastic- Pre- and post-processing of stainless steel and aluminium- Satin finishing and fine finishing of sheet steel, non-ferrous metals, wood and plastic- Rough, medium and fine sanding ...

- Glass fibre support- Slanted mould- Special corundum, cotton fabric- With multiple embedded cooling layers- The Abrasive material does not clog and the sanding pattern remains free of discolouration or smearing- Inner hole ø (mm): 22.23 ...

• Areas of application:
  - Pre- and post-processing of stainless steel and aluminium surfaces
  - Satin finishing and fine finishing of sheet steel, non-ferrous metals, wood and plastic parts
  
• Properties:
  - Abrasive fleece consists of non-woven nylon fibres in which the abrasive grain is evenly distributed
  - The elastic non-woven fabric adapts to any surface and enables consistent work results throughout the entire service life
  - Non-woven flap sanders are moisture-resistant and do not become clogged
  
• Note:
  - The sanding pattern can be noticeably changed by changing the rpm up to the permissible rpm and varying the contact pressure; observe the permissible rpm!
  

• Areas of application:
  - Pre- and post-processing of stainless steel and aluminium surfaces
  - Satin finishing and fine finishing of sheet steel, non-ferrous metals, wood and plastic parts
  
• Properties:
  - Abrasive fleece consists of non-woven nylon fibres in which the abrasive grain is evenly distributed
  - The elastic non-woven fabric adapts to any surface and enables consistent work results throughout the entire service life
  - Non-woven flap sanders are moisture-resistant and do not become clogged
  
• Note:
  - The sanding pattern can be noticeably changed by changing the rpm up to the permissible rpm and varying the contact pressure; observe the permissible rpm!

• Areas of application:
  - Fine grinding work in apparatus and container construction, machining of cast parts, moulds and Tools
  - Structuring, deburring, cleaning of metal, wood and plastic parts
  - Use on hand-held grinding machines
  
• Properties:
  - The flaps made of flexible abrasive cloth arranged radially around the plastic core allow optimum adaptation to the contours of the workpiece to be processed
  
• Note:
  - Coarse grit at high rpm has a finer effect, Fine grit at lower rpm has a coarser effect, observe permissible rpm

• Areas of application:
  - Fine grinding work in apparatus and container construction, structuring, Deburrer, Cleaning of metal, wood and plastic surfaces
  - Especially for pre- and post-processing of stainless steel and aluminium surfaces
  - Use on hand sanding machines
  
• Properties:
  - Fastening via M 14 internal thread on commercially available, adjustable angle grinders
  - Quick tool change as no fastening tools are required
  - Flaps made of flexible abrasive cloth and fleece allow optimum adaptation, especially to contoured or curved surfaces
  
• Note:
  - Coarse grit at high rpm has a finer effect, fine grit at lower rpm has a coarser effect
  - The sanding pattern can be noticeably changed by changing the rpm up to the permissible rpm and varying the contact pressure; observe the permissible rpm!

- Glass fibre support- Oblique mould- Zirconium aluminium oxide, cotton fabric- Inner hole ø (mm): 22.23 ...

- Glass fibre support- Oblique mould- Zirconium aluminium oxide, polyester fabric- For hard use on sharp burrs and edges- Inner hole ø (mm): 22.23 ...

• Areas of application:
  - Universal for seamless, shadow-free surfaces on metal, wood or plastic
  - Pre- and post-processing of stainless steel and aluminium
  - Satin finishing and fine finishing of sheet steel, non-ferrous metals, wood and plastic
  - Rough, medium and fine sanding

- Glass fibre support- Oblique mould- Zirconium aluminium oxide, cotton fabric- Inner hole ø (mm): 22.23 ...

• Glass fibre carrier
  
• Angled shape
  
• Outstanding removal rate