ZEWOTHERM

• Dry construction system for dry and wet screeds with heat conduction plates for laying distances 125-250-375 mm and heating pipe ø 14 mm.
  The dry construction system is particularly suitable for all new and old buildings and renovation projects.
  The low installation height, the minimised weight and the optimum heat distribution via the heat conduction plates make for an extremely flexible system solution.
  In this context, flexibility also means that the system is equally suitable for dry screeds and in wet applications.
  With the system components easy to handle and the rapid and straightforward installation, commissioning is complete in little time.
  Profile plate made of EPS polystyrene hard foam according to DIN EN 13163 and DIN V 4108-10. With grooved profile for heat conduction plates in meander-shaped pattern for holding 14 x 2 mm heating pipe. Material: EPS DEO dh WLG 035. building material class according to DIN 4102:B1.
  
• Heating pipe installation spacing: 125/250/375 mm, i.e. 8.0 / 4.0 / 2.7 m pipe/m²
  
• Panel thickness: 25 mm
  

• Nap element made of recyclable polystyrene (PS) film with tread-resistant shaped pipe retaining naps, two-sided push-button connection and holes in naps, and surface for composite between special screed and substrate.
  
  Technical data:
  
• Material class: B2
  
• Spacing (for pipe ø12x2 mm): axial 90° (5 / 10 / 15 cm), diagonal 45° (7 / 14 / 21 cm)
  

• The 18 mm-thick system panels have a pre-assembled pipe register of quality polybutene pipes 12 x 1.3 mm with fixed spacing of 10 cm. The elements are connected in series and are designed for a maximum pipe length of 80 m. The five panel sizes cover all standard installation situations.
  Advantages:
  
• For heating and cooling
  
• Prefabricated air-conditioning panels with PB pipe
  

• Tacker system plate
  With fabric film, heat and impact noise resistance DIN EN 13163 as interior insulation on ceiling or floor panels DIN V 4108-10, material class B2 according to DIN 4102-B2, fabric-reinforced plastic film lamination with ratchet pressure as a film layer against screed moisture according to DIN 18560 and for locking the staple clips with 30 mm excess foil to cover the composite panel tightly.
  Fire behaviour class E
  
• Made of polystyrene foam
  
• Imprinted, square 5 cm division
  

• Application according to DIN EN 13163for internal insulation on ceilings or floor panels under screeds according to DIN V 4108-10. Also suitable for renovation work. Consisting of PS film with tread-resistant, shaped pipe retaining naps for securely fixing pipes when laying axially 90° and 45° diagonally, with two-sided excess film for a screed-resistant push-button connection.
  
• for 14 to 16 mm pipes
  
• Nap height: 18 mm
  

• Colour: silver/red
  
• Imprinted, square 5 cm graduation
  
• Dimensions: 100 x 1.03 m
  

• Three-way co-extruded, oxygen-tight polybutene pipe (red), according to DIN 4726/27 and DIN EN 12319, particular for the wall heating plaster system
  
• 200 m per roll

• Dimensions: 2 m x 1 m as a folding panels
  
• PU: 5 2 m² panels = 10 m² in total
  
• From 300 m² special price on request

• As covering film or separating layer between thermal insulation and screed
  
• Thickness x width x length: 0.2 mm x 2 m x 50 m
  
• Rolls of 100 m²

For redirecting the heating pipes in the distributor area. For pipes up to max. ø 20 mm, r = 130 mm. ...

• With TH profile for wall heating 12 x 1.3 mm

• For underfloor, surface heating and radiator connection
  
• Made of polyethylene Type II s per EN ISO 21003
  
• Universal connection technology with Eurocone compression fitting
  

• For fully automatic control of the operating modes and power levels depending on the room humidity and temperature
  
• The plug-in sensor unit is simply plugged into the blower unit
  
• One sensor is required per zone

• Reinforcement fabric for plaster, alkali-free.
  
• Mesh size: 6 mm
  
• Roll: 1 mm x 50 m
  

For safe connection of panel edges, with special nozzle. About 1 tube is required per 5 m². ...