Angled valve 1/2"Order no.: 93 068 97
XXX.XX
€/unit
Replacement item available Bulk prices
Description • Material: chrome-plated brass • Self-sealing • Pinch screwing connection with length adjustment ø 10 mm • Push-on collar • No other sealing agents (Teflon tape, hemp or similar) should be applied to the self-sealing external thread The 1/2 inch PA-approved self-sealing angle valve is used as a connection fitting between the pipe installation in the wall and the tapping point. It can be used to connect outlet fittings such as washbasin or kitchen fittings. In addition, 1/2 inch angle valves are often used to connect bidets or cisterns for surface mounting. The angle valve has a self-sealing 1/2 inch external thread for connection to the pipe installation in the wall. When screwed in, it is sealed by a sealing ring integrated into the thread, which makes installation especially straightforward. The 1/2 inch angle valve allows you to interrupt the water supply to the tapping point. This is necessary, for example, in the event of a defect in the connected outlet fitting, and also enables simple replacement. The 1/2 inch regulating angle valve can be used not only to interrupt the water supply but also to regulate the flow rate. In this way, the flow to the respective fitting or the connected device can be manually adjusted. In addition, 1/2 inch angle valves can be used in conjunction with outlet fittings to compensate for any pressure differences between cold water supply and hot water supply. If angle valves 1/2 are self-sealing, no additional sealing materials such as hemp or Teflon tape should be used during installation. To product family Questions regarding itemPlease login beforehand |
Products |