Deep well pumps EV-TBP Automatic

• Built-in automatic switching system incl. dry-running protection switches the pump on automatically to remove water then switches it off again
• Pump housing: stainless steel
• Installation position: vertical
• Multi-level
• Connection cable: 22 m
• Plastic cable as drainage aid: 20 m
• With non-return valve
• Sheath current cooling (no cooling sheath required)
• With thermal and electrical motor monitoring
• Double mechanical seal
• Impellers and guide wheels made of low-wear plastic
• Immersion depth max.: 22 m
• Water column above pump max.: 25 m
• Minimum immersion depth for automatic operation: 15 cm
• For pumping from depths exceeding 8.5 m
• With short pressure line, an expansion vessel of min 0.3 l must be installed
• For garden irrigation and domestic water supply

Technical data:
• Nominal power: 800 W
• Max. flow rate: 5600 l/h
• Max. discharge head: 50 m
• Max pressure: 5.0 bar
• Pump drive: 6-level
• Medium temperature: 40°C
• Housing ø: 96 mm
• Weight: 12 kg
• Voltage: 230 volts, 50 Hz
• Pressure connection: DN 25 (1”)

• Deep well pump with floating extraction: Suction hose DN 25 (1”), 1.5 m check valve, filter and float ball