Jung switch/blind actuator Secure KNX REG

• Rated voltage KNX: DC 21-32 V SELV
- Switching voltage: AC 250 V ~
- Switching current AC1: 16 A
• Project planning and commissioning with ETS5 or newer
• Switching electrical loads with potential-free contacts and electrically operated blinds, shutters, awnings and similar hangings

• Ambient temperature: -5 to +45°C
• Fluorescent lamps: 16 AX
• Current carrying capacity:
- Neighbouring outputs: Σ 20 A
• Loads per output:
- Resistive load: 3000 W
- Capacitive load: 16 A / 140 µF
- Motors: 1380 VA
- Inrush current 200 µs: max. 800 A
- Inrush current 20 ms: max. 165 A
• Lamp loads 230 V:
- Incandescent lamps: 2300 W
- HV Halogen lamps: 2300 W
- HV LED lamps: max. 400 W
• LV halogen lamps:
- With electronic transformers: 1500 W
- With inductive transformers: 1200 VA
• Fluorescent lamps T5/T8:
- Uncompensated: 1000 W
- Parallel-compensated: 1160 W / 140 µF
- Duo circuit: 2300 W / 140 µF
• Compact fluorescent lamps:
- Uncompensated: 1000 W
- Parallel-compensated: 1160 W / 140 µF
• Mercury vapour lamps:
- Uncompensated: 1000 W
- Parallel compensated: 1160 W / 140 µF
• Connections, supply and load:
- Connection type: Screw terminals
- Single-wire: 1 x 0.5 ... 4 mm²
- Flexible without ferrule: 1 x 0.5 ... 4 mm²
- Fine stranded with ferrule: 1 x 0.5 ... 2.5 mm²
- KNX: KNX connection terminal
• Outputs can be operated manually, building site operation
• Feedback in manual mode and in bus mode
• Disabling of individual outputs by hand or bus
• Central functions
• Cyclical monitoring
• KNX Data Secure compatible from ETS 5.7.3
• Can be updated with ETS Service app
• Switch operation properties:
- Normally open or normally closed operation
- Feedback function
- Logic operation and priority control function
- Central switching function with collective feedback
- Time functions: Switch-on, switch-off delay, staircase light switch with pre-warning function
- Scene function
- Operating hours counter
• Blind operation features:
- Suitable for 230 V AC motors
- Operating modes "blind with slat", "roller shutter/awning", "ventilation flap/roof window"
- Blind position and slat position directly controllable
- Feedback of movement status, blind position and slat position
- Cyclical feedback in travelling status
- Forced position via higher-level control system
- Safety function: rain alarm, frost alarm, 3 independent wind alarms
- Sun protection function with automatic heating/cooling function
- Only load neighbouring outputs to the extent that the sum of their output currents is max. 20 A