Jung binary input 6-way KNX REG 2116REG KNX

• Division units: 2
• Nominal voltage KNX: DC 21-32 V SELV
• Nominal voltage: AC/DC 10-230 V
• 6 inputs AC/DC 10-230 V ~
• Functions: switching, dimming, blinds up/down, brightness values, temperatures, calling up and saving light scenes

• Current consumption KNX: max. 7.5 mA
• KNX connection: connection terminal
• Ambient temperature: -5 ... +45°C
• Relative Humidity: . 93 % (no condensation)
• Inputs
• Signal level "0"-Signal: AC/DC 0 ... 2 V
• Signal level "1"-Signal: AC/DC 7 ... 265 V
• Input current at nominal voltage
• Input current: approx. 0.7 mA
• Rated frequency AC signal: 30 ... 60 Hz
• Signal duration pulse counter: min. 100 ms
• Cable length: max. 100 m
• Number of contacts per input:
- Normally open contacts: max. 50
- Normally closed contacts: max. 50
• Power loss: max. 1 W
• Connection:
- Connection type: Screw terminals
- Single-wire: 1 x 0.5 ... 4 mm²
- Flexible without ferrule: 1 x 0.5 ... 4 mm²
- Fine stranded with ferrule: 1 x 0.5 ... 2.5 mm²
• Different outer conductors can be connected per input group, e.g: E1-3 = L1 and E4-E6 = L2
• Interrogation of conventional Switches or push-button contacts, window contacts etc. in KNX systems for Detectors of statuses, meter readings, operation of loads etc.
• Status LED for each input
• Recognises voltage levels and changes at the input
• Sending the input status to the bus
• Transmission behaviour freely adjustable
• Pulse and switching counter function
• Inputs can be blocked separately
• Connection of external AC and DC voltages possible