Jung heating actuator with thermostat 6-way KNX REG 2336REGHZRHE

• Division units: 4
• Nominal voltage: AC 110-230 V ~, 50/60 Hz
• Nominal voltage KNX: DC21-32 V SELV
Heating outputs:
• Switching voltage: AC 24 / 230 V ~
• Switching current: 5-160 mA
• 6 “Triac” outputs
• Integrated room temperature control with setpoints

• Standby power: max. 0.4 W
• Power loss: max. 1 W
• KNX power consumption: max. 250 mW
• Ambient temperature: -5 to +45°C
Heating outputs:
• Contact type: semiconductor (triac), ε
• Mains frequency: 50/60 Hz
• Inrush current: max. 1.5 A (2 s)
• Inrush current: max. 0.3 A (2 min)
• Number of Actuators per output:
- 230 V Actuators: max. 4
- 24 V Actuators: max. 2
• Connection of outputs: screw terminals
- Single-wire: 1 x 0.5 ... 4 mm²
- Flexible without ferrule: 1 x 0.5 ... 4 mm², 1 x 0.5 ... 4 mm² , 1 x 0.5 ... 2.5 mm²
• With electronic manual override and LED status display
• Switches Electro-thermal actuators for heating systems (e.g. TSA 230 NC WW, TSA 24 NC WW) or cooling ceilings
Product features:
• Six independent controllers for controlling up to six independent rooms
• Controller function for Heating and cooling mode
• Actuators with de-energised open or de-energised closed characteristic can be controlled
• Actuators 230 V or 24 V controllable
• Outputs can be operated manually, building site operation
• Feedback in manual mode and in bus mode
• Disabling of individual outputs by hand or bus
• Overload-proof, short-circuit-proof
• Error display with LED
• Protection against stuck Valves
• Forced position
• Different setpoints for forced position or emergency operation in the event of bus failure for summer and winter
• Cyclical monitoring of the input signals can be parameterised
• Feedback via bus, e.g. in the event of power failure, overload or sensor failure