GIRA switch/blind actuator 24-/12-way 16A Standard GIRA One & KNX REG

• Nominal voltage:
• KNX: DC 21-32 V SELV
• Switching capacity: AC 250 V, 16 A / AC1
• Max. switching current: 800 A (200 µs), 165 A (20 ms)
• Combinations of switch and blind actuator are possible

• Current carrying capacity of neighbouring outputs: Total 20 A
• Connected load:
- Resistive load: 3000 W
- Capacitive load: 16 A, max. 140 µF
- Motors (blinds or fans): 1380 W
- Incandescent lamps: 2300 W
- HV halogen: 2500 W
- HV LED lamps: typ. 400 W
- Wound transformer: 1200 VA
- Tronic transformer: 1500 W
• Fluorescent lamps:
- Uncompensated: 1000 VA
- Duo circuit: 2300 VA
- Parallel compensated: 1160 VA
• Mercury vapour lamps:
- Uncompensated: 1000 W
- Parallel compensated: 1160 W
• Connections:
- GIRA One Medium: Twisted pair YCYM 2 x 2 x 0.8
- Test voltage: 4 kV (KNX/EIB bus line)
- GIRA One Bus: Connection and branch terminal block
- Load: Screw terminals (max. 4 mm² or 2 x 2.5 mm²)
• Current consumption:
- Gira One Bus: 4 to 18 mA
• Function as a switching actuator or as a blind actuator
• For the blind actuator function, two neighbouring relay outputs are combined to form a blind output
• Shading and ventilation function
• Connection and branch terminal included in the scope of delivery

• Function in the GIRA One system:
- Switching of loads or for controlling blinds, roller shutters, awnings, roof window operation
- In blind operation, the adjacent outputs (A1/A2, A3/A4...) are combined to form a blind output
- Mixed operation possible on one Actuator (e.g. A1 and A2 Venetian blind, A3 and A4 Venetian blind, A5 Switches, A6 Switches...)
- Manual operation of the outputs
- Programming and commissioning with the GIRA Project Assistant (GPA) from version 5.0 (available from 03/2023)
- Encrypted data transmission between the GIRA One devices

• Function in the GIRA KNX system:
- Blind or switching mode can be parameterised. In blind mode, the adjacent outputs (A1/A2, A3/A4...) are combined to form a blind output. Mixed operation possible on one Actuator (e.g. A1 & A2 Venetian blind, A3 & A4 Venetian blind, A5 Switches, A6 Switches...)
- Actively transmitting feedback or status messages can be delayed globally after bus voltage recovery or after an ETS programming operation
- Manual operation of the outputs independently of the KNX with intelligent LED status displays to save energy
- Extended manual operation: change between blind and switching operation before ETS commissioning
- Heartbeat function for monitoring the device, cyclical transmission 1 Bits
- Bistable Relay
- Supply from KNX bus, no additional power supply required
- Simplified terminal connection (no terminal overlapping)

• Notes:
- Update capability via the Gira Project Assistant (GPA)
- KNX Data Secure compatible
- Fast download of the application (long frame support)
- Firmware updates are possible with the Gira ETS Service App (additional software)